**PCIe 1x to 16x USB 3.0 GPU Riser Card Adapter – VER010S** Upgrade your GPU connectivity setup with the VER010S PCIe Riser Card Adapter. Designed to connect a graphics card through a PCIe x16 slot while linking to a motherboard PCIe x1 slot via a USB 3.0 cable, this riser kit is suitable for compatible PC and GPU installation setups. **Key Features** - **Model:** VER010S - **Main Slot:** PCIe x16 graphics card slot on the riser board - **Motherboard Connection:** PCIe x1 adapter - **Link Cable:** USB 3.0 cable between the riser board and PCIe x1 adapter - **Power Inputs:** 4-pin Molex and SATA power connectors, depending on the riser board configuration - **Purpose:** Allows flexible graphics card placement outside the motherboard's main PCIe slot - **Compatibility:** Designed for compatible PCIe graphics cards and motherboards **Connection Guide** 1. Insert the PCIe x1 adapter into a motherboard PCIe x1 slot. 2. Connect the USB 3.0 cable between the adapter and riser board. 3. Insert the graphics card into the riser board's PCIe x16 slot. 4. Connect the required riser-board power input from the PSU according to the board's labeling and instructions. **Important:** The USB 3.0 cable carries the PCIe data link; it is not a substitute for the riser board's power connection. Use only the required power connector, and avoid connecting SATA and Molex power simultaneously unless the manufacturer's instructions explicitly permit it. Available at ZainLinks.